The first thing you’re going to need to do is to gather up your tools, to take apart your Xbox 360 console.

Notice: To properly install a new cooling fan which is considered a modification will void your warranty, as long as you’re aware of this and you decide to continue, we are in no way responsible.

Now let’s get to the hard part, taking apart your Xbox 360, in order to install a new cooling fan you’re going to have to take your Xbox 360 apart, there’s just no way around it.

You’ll need:

1. T10 screw driver
2. T8 screwdriver
3. Flat head screwdriver or knife
4. Masking tape or cup for your screws
5. New cooling Whisper fan which you can find at the console shop

If you’re not quite sure how to dismantle your Xbox 360, watch this video or a video of your preference found on YouTube or anywhere else you like.



Once you have your Xbox apart just removing the upper half of the shell where you can locate the fan unit.

Remove the plastic casing holding the fan unit in place
Remove the Air Tunnel

Unplug the fan
Unplug the Fan

Pry the Chassis away from the fan in order to properly remove it
Pry the Chassis

Pull the fan out and install the new whisper fan
New Fan in Place

After that you’re all done, that’s all there is to it, now all you need to do is put your Xbox 360 back together again!

Here is the link again to get the whisper fan from console shop

Thanks for reading, if you enjoyed this article, don't forget to bookmark it and subscribe to our feed located on the top upper right hand side.

0 comments